If you run finance for a UK manufacturer that buys steel, aluminium, cement, fertiliser or hydrogen from outside the UK, a new tax applies to those imports from 1 January 2027. The UK Carbon Border Adjustment Mechanism (CBAM) puts a price on the carbon embedded in each shipment. The charge arises on import, but the first return and payment, covering all of 2027, isn't due until 31 May 2028, so the cost has to be tracked and provided for long before HMRC asks.
The test for whether this applies to you has two parts: you import goods in one of the five sectors, whether as raw material, components or finished product, and the value of those imports passes £50,000 in a year. In this article we'll look at how the tax works, why the first year's rate understates what's coming, what selling into the EU adds, and what finance can settle during 2027.
What starts on 1 January 2027
The key points once CBAM comes into force on 1 January 2027:
1. CBAM covers goods in five sectors (aluminium, cement, fertiliser, hydrogen, and iron and steel), identified by commodity code and applied UK-wide, including Northern Ireland. Scrap is excluded, and electricity is not one of the sectors.
2. The liability on each consignment is its embedded emissions, in tonnes of CO2e, multiplied by the sector's CBAM rate for the quarter it was imported, less any relief for carbon price already paid where it was made.
3. You have to register with HMRC once the value of your CBAM goods reaches £50,000, tested both over the previous 12 months and over the next 30 days.
4. Registration opens on 1 January 2028 and first-year importers have until 31 January 2028.
5. If your CBAM imports are likely to pass £50,000 during 2027, your obligations start on the day you cross it. The import records, supplier emissions data and a running estimate of the liability need to exist from January, even though there's nowhere to file them until 2028.
Why the 2027 rate is the lowest you'll see
HMRC sets a rate for each sector every quarter: the average UK ETS carbon price for the previous quarter, cut by the share of that sector's emissions UK producers still cover with free allowances, so an importer pays roughly what a UK producer pays, and at the start the cut is large. HMRC's illustrative rates from October put steel at £9.69 per tonne of CO2e, aluminium at £9.79 and cement at £8.78, against a UK ETS average of £58.15. The binding rates for January to March 2027 are due before the end of 2026.
The cut shrinks every year because UK ETS law phases out free allowances on a fixed schedule, from a factor of 97.5% in 2027 to 77.5% in 2030. Apply HMRC's method with the 2030 factor at the same £58.15 carbon price and the cement rate rises from £8.78 to about £18.90, roughly double on the same tonnage, before any rise in the carbon price. A provision set from the 2027 rate is set from the floor. The more useful figure for the board is a 2030 run-rate, at today's carbon price and at a higher one, shown alongside the 2027 number.
Where the emissions figure comes from
Customs duty is a rate on a value already in your ledger. CBAM is charged on tonnes of CO2e, which only the installation that made the goods can measure, confirmed by an accredited verifier. Where verified data isn't available you can use HMRC's default values, still to be published, as a figure to provide against until verified data arrives.
Goods that have already borne a carbon price, such as under the EU ETS, qualify for carbon price relief against the UK charge, provided you hold a carbon pricing verification form from an accredited verifier for the producing installation. A UK-EU deal to link the two emissions trading schemes is on the table for the 20 November summit and could eventually exempt EU goods; today no country is exempt. Requesting, checking and storing supplier emissions data is specialist work for CBAM software or an emissions-data adviser, outside finance tooling.
If you also sell into the EU
The EU's own CBAM has been in its definitive phase since 1 January 2026, and the declarant there is your EU customer, so if you sell steel or aluminium products into the EU, expect them to ask you for verified emissions data. Their first declaration, covering 2026 imports, is due by 30 September 2027, so the request may land before your own UK data work is done.
What finance owns this year
Three things need an owner in 2027, each starting from records you already hold:
1. Scope. Run your 2026 import entries by commodity code and origin to see which suppliers are in scope and whether you're likely to cross £50,000, and keep every CBAM import record from 1 January.
2. Data. Rank in-scope suppliers by tonnage, ask the largest few for verified emissions data (plus a carbon pricing verification form where they already pay a carbon price), and plan to use default values for the rest.
3. Money. Accrue as goods arrive, at the quarterly rate and default values if that's all you have, and agree the accounting basis with your auditor. Put 31 May 2028 in the cash forecast, then the quarterly cycle from 31 July 2028, and model the rate rising.
All three depend on supplier master data: country of origin and commodity code against each supplier, kept current. It's the one CBAM input finance already holds, and often the patchiest field in the purchase ledger.
Done during 2027, the May 2028 return arrives with suppliers already scoped, verified figures from the largest of them, and a provision that has been building since January. Check out HMRC's CBAM factsheet for details on rates, records and returns.






